Comment whatever you like, but comment moderation is turned on. It might take some time for your comment to be published.

Thursday, July 22, 2010

Could not find an editor for H (.) file

Having headache trying to create Microsoft Outlook 2003 email Signature in Windows 7, using Advanced Edit function. Prompted with error "could not find an editor for H (.) file".

Tried the method in Control Panel - Internet Options - Programs - HTML Editing & setting the default program to Microsoft Office Words, but still doesn't work.

This method should work. Click on Internet Programs - Set Programs - Associate a file type... Scroll down & look for .htm & change the default program to Microsoft Office Words.


Friday, July 16, 2010

Easy Job, Not So Easy Job

Sometimes, things can look so simply, but once we got our hand into doing it ourself, then only do we realised otherwise.
Settings up a small computer network requires lots of time, especially laying network cables. Cable must be properly label, tidy, hook up to switch & test. I spent 4 hrs completing the job.

Wednesday, July 14, 2010

Make sure the disk it not write-protected?

Trying to delete virus infected file, but always get this message :

Cannot delete file OR

Access is denied OR

There has been a sharing violation OR

The file is in use by another program or user. Make sure the disk is not full or write-protected and that the file is not currently in use.

Well, thanks UNLocker for saving the day & making my work much easier. There's no need to reboot the computer into safe mode to delete the infected file. It's just awsome!



Monday, July 12, 2010

Problem with Cisco VPN & Windows 7

Successfully installed Cisco VPN to Windows 7 but not able to connect using VPN ? Added Cisco VPN program to Firewall, added UDP Port 500, 4500, TCP 10000 to Firewall too but nothing seems to work ? Try this :

Edit the Cisco VPN Profile PCF & add this to the bottom of the line

UseLegacyIKEPort=1

Save the Profile & give it a shot.

Sunday, July 11, 2010

Cisco VPN Internal Error 2738 on Windows 7

Installing Cisco VPN ver 5.0.04.0300 on my HP Mini 2140 running on Windows 7 proof to be tough. Taking almost half of my day to resolved this.

First problem, VPN just refused to install due to HP Mini 2140 screen resolution.
This can be resolved by using InstED It program ( http://www.instedit.com/download.html ) to modify the Cisco VPN installer. Install InstED, find "screen resolution". Edit the 800 x 600 resolution to 1024 x 576. Save & run the installer.


Second was the Internal Error 2738 message.
These works for me (thanks to the power of Net).

Run Command Prompt using Administrator mode.

Paste this command:

reg delete HKEY_CURRENT_USER\SOFTWARE\Classes\CLSID\{B54F3741-5B07-11CF-A4B0-00AA004A55E8} /f

Once the command succcesfully executed, paste this :

reg delete HKEY_CURRENT_USER\SOFTWARE\Classes\CLSID\{F414C260-6AC0-11CF-B6D1-00AA00BBBB58} /f

Once the command sucessfully executed, paste this :

regsvr32 vbscript.dll

Saturday, July 10, 2010

Setup was unable to create a new system partition

First time with Windows 7 installation. Hit an error "Setup was unable to create a new system partition ...".

Solution, unplug any USB drive connected.


Reboot into Windows 7 setup mode again. Click the DRIVE option & re-delete the hard drive partition, create a new partition & re-format it.


And that should do the job!
Comment whatever you like, but comment moderation is turned on. It might take some time for your comment to be published.